• Improves handling by reducing chassis flex in front sub-frame
• Low profile chromoly Aero tubing
• Gives maximum ground clearance
• Easy oil changes without removing brace
• Application:  00-07 Honda S2000
• Installation time:  30min +/-

• Rear Lower Suspension Brace
• Clear Anodized Billet Aluminum
• Replaces stock brace between rear lower control arms
• Helps to increase chassis stiffness
• Application:  00-06 S2000
• Installation time:  15 minutes +/-

• Two-piece 304 Stainless Steel cat-back
• Polished Stainless Steel Resonator and Mufflers
• 3.5" Polished Stainless Steel Resonated Tips
• Gives the S2000 a smooth low tone, without being too loud
• This is the perfect system for street use
• Extensive track testing for reliability and sound measurements
• Application: 00-03 Honda S2000
• Installation time: 1/2 hour +/-

• Two-piece 304 Stainless Steel cat-back
• Polished Stainless Steel Resonator and Mufflers
• 3.5" Polished Stainless Steel Resonated Tips
• Gives the S2000 a smooth low tone, without being too loud
• This is the perfect system for street use
• Extensive track testing for reliability and sound measurements
• Application: 04-07 Honda S2000
• Installation time: 1/2 hour +/-

• Two-stage, hi-flow, "drop-in" filter upgrade
• Includes filter, and inlet adapter
• 3hp gain at the wheels
• Application:  00-09 Honda S2000
• Installation time:  10 min +/-

• Replacement Air Filter for selected CTE Iceboxes
• SOLD INDIVIDUALLY
li>Installation time:  5 min +/-

• NEW UPDATED BOX DESIGN
• New box design allows for greater hood clearance and simple prop-rod install
• Cold Air Intake with reusable two-stage foam filter element
• Carbon fiber lid on air box
• Will not ingest water
• Slightly louder than stock
• Air box suppresses noise from filter element
• CARB legal for street use in California
• Application:  00-05 Honda S2000

• NEW UPDATED BOX DESIGN
• New box design allows for greater hood clearance and simple prop-rod install
• Cold Air Intake with reusable two-stage foam filter element
• Carbon fiber lid on air box
• Will not ingest water
• Slightly louder than stock
• Air box suppresses noise from filter element
• CARB legal for street use in California
• Application:  06-09 Honda S2000

If you are ready to transform your S2000, the CT Engineering After-cooled Supercharger kit is a great start. This supercharger kit utilizes the benefits of a centrifugal supercharger, and is designed to match the factory power characteristics of the high revving Honda 2.0L power plant. The CT Engineering after-cooled Supercharger kit will add more power to your S2000 at the higher RPM's, keeping the car drivable in traffic & day-to-day driving; but throttle the engine to redline & you'll feel the burst of acceleration from the additional 70-80 horsepower at the rear wheels.

This simple bolt on kit utilizes a very efficient gear driven centrifugal supercharger. Included in the kit is everything you'll need to transform your S2000 into a Boxster killer, with 310-320 horsepower at the crank. The kit is CARB legal and includes the blower unit, after-cooler, after-cooler radiator, water pump, all mounting brackets, fuel system upgrades (including an in tank Fuel Pump & CT Engineering FPR), air box, fuel pump, regulator, all hoses & drive belt and the CT Engineering ESM unit. Cooler housing is designed with popular blow-off valve bolt pattern on by-pass valve outlet, for those who want to run higher than standard boost levels. Note: Warranty is void w/ higher than standard boost level.

This kit is designed so that it can be removed without any modifications to the factory components. 

• Installation time:  12 hours +/-
• Shipping dimensions (2 boxes):  Box #1 = 30 X 18 X 16 (inches) (55 lbs.), Box #2 = 15 X 15 X 15 (inches) (17 lbs.)

If you are ready to transform your S2000, the CT Engineering After-cooled Supercharger kit is a great start. This supercharger kit utilizes the benefits of a centrifugal supercharger, and is designed to match the factory power characteristics of the high revving Honda 2.0L power plant. The CT Engineering after-cooled Supercharger kit will add more power to your S2000 at the higher RPM's, keeping the car drivable in traffic & day-to-day driving; but throttle the engine to redline & you'll feel the burst of acceleration from the additional 70-80 horsepower at the rear wheels.

This simple bolt on kit utilizes a very efficient gear driven centrifugal supercharger. Included in the kit is everything you'll need to transform your S2000 into a Boxster killer, with 310-320 horsepower at the crank. The kit is CARB legal and includes the blower unit, after-cooler, after-cooler radiator, water pump, all mounting brackets, fuel system upgrades (including an in tank Fuel Pump & CT Engineering FPR), air box, fuel pump, regulator, all hoses & drive belt and the CT Engineering ESM unit. Cooler housing is designed with popular blow-off valve bolt pattern on by-pass valve outlet, for those who want to run higher than standard boost levels. Note: Warranty is void w/ higher than standard boost level.

This kit is designed so that it can be removed without any modifications to the factory components. 

• Installation time:  12 hours +/-
• Shipping dimensions (2 boxes):  Box #1 = 30 X 18 X 16 (inches) (55 lbs.), Box #2 = 15 X 15 X 15 (inches) (17 lbs.)